Summary
This article provides details and information about two devices: the W1800 Wi-Fi Router, and the W1800 SAT Wi-Fi Extender.
The W1800 Wi-Fi router and the W1800 SAT Wi-Fi Extender are deployed throughout the Summit Broadband Service Area.
Important notes
- The W1800 Router is used as a stand-alone router, and is also used with a mesh setup.
- The W3000 is deployed as the Wi-Fi Router in stand-alone and Wi-Fi 6 Mesh installations.
- The W1800 SAT Wi-Fi Extender is identical in form factor to the W1800 unit.
- The W1800 Router and the W3000 Wi-Fi Extender support Wi-Fi speeds for customers that have a 1G x 1G or faster Internet.
W1800 SAT router and W3000 Wi-Fi extender identification and key features
The W1800 router and the W1800 SAT Wi-Fi Extender are manufactured in black and white.
NOTE: Summit Broadband will deploy these routers based on inventory availability. Your technician and Customer Support do not have the ability to determine which color is installed in your residence.
Key features
- 2 x 10/100/1000BASE-T Ethernet RJ-45 Ports (Auto-sensing WAN/LAN )
- 5G 2x2 802.11ax @27dBm (1200Mbps)
- 2.4G 2x2 802.11ax @26dBm (600Mbps)
- EasyMesh Support
- Band Steering
Quick specifications
- Type Wi-Fi 6 Wireless Router
- Model W1800 / W1800 SAT
- Main Chip BCM6755
- Regulatory CE/FCC/CCCrts 2 x GE (Auto-sensing WAN/LAN)
- Ethernet Po Operating Temperature 0 ~ 40℃
- Operating Humidity 10%~90%, non-condensing
- Dimension 160.5 x 96 mm
- Installation Desktop
- Weight 360g
Detailed specifications
Wi-Fi Performance
- 2.4GHz （802.11ax, 2*2）
-
- Standard 2.4GHz: 802.11ax, 802.11n
- RF Power EIRP 27dBm
- Antenna Two (2) internal antennas 5dBi Gain
- Connection rate 574Mbps
-
- 5GHz (802.11ax, 2*2)
- Standard 5.0GHz: 802.11ax, 802.11ac, IEEE 802.11n
- RF Power EIRP 23dBm
- Antenna Two (2) internal antennas 5dBi Gain
- Connection rate 1.2Gbps
Ethernet WAN/LAN
- Interface 2x RJ45 connectors
- Standard Compliant with IEEE 802.3, 802.3u, 802.3ab
- Link Support Half-duplex & full-duplex operation
- Support 10/100/1000Mbps auto-negotiation
- Support MDI/MDIX auto detection
Mesh
- Standard Wi-Fi Alliance EasyMesh
- Backhaul Methods: Backhaul via Wi-Fi 5G 802.11ax
- Backhaul via Wired RJ-45 Ethernet
- Pairing Method Pushing WPS Button or Auto Paring (pre-configured)
Power
- Standard Wall Adapter, 100-240VAC input, 50/60Hz; 12VDC output, 1.5A max
Buttons and LEDs
- Buttons Power, WPS (also used for Reset)
- LED One tri-color light (Normal, Alarm, WPS)
Features
Security
- WPA-PSK, WPA2-PSK, WPA3-SAE, AES, TKIP,WPS
Management
- Web-GUI, Mobile Phone App (optional), TR069, IGMPv1/v2/v3, DHCP,
- NTP Client, DDNS, Port Forwarding, DMZ
WAN connection
- Internet connect type: Static IP, DHCP, PPOE.
- Support Router mode, Bridge mode
Wi-Fi
- 11AX, MU-MIMO
- HT20/HT40/HT80
- Support Wireless power multi-level selection.
- Wi-Fi Timing
- Wi-Fi dual band Roaming
- Band Steering
- Omnidirectional antenna
- EasyMesh
Special features
- Auto-deteceting WAN/LAN
- Support Anti-rub Network
- Support Access Restriction
- Support One-key into blacklist
- Parental Control
- LED Timing
- IP and MAC binding（Using Printer）
- Firewall
- DDNS
- Port mapping
- Traffic Monitoring
- Associate equipment Management
- Support Guest Wi-Fi, Guest Wi-Fi Isolation
- Support E-link
- Support IPv6
Diagnostics
- Internet diagnosis, Ping diagnosis, Traceroute diagnosis.