What are the features and controls of the Wi-Fi 6 AX1800 Wi-Fi mesh router?

Wi-Fi 6 AX1800 Wi-Fi Mesh Router

Key Features:

1. 4 x 10/100/1000BASE-T Ethernet (Auto-WAN detection)
2. High W-Fi Power with Better Wi-Fi Coverage
3. 5G 2x2 802.11ax @ 30dBm, 1200Mbps
4. 2.4G 2x2 802.11ax @ 30dBm, 600Mbps
5. EasyMesh Support
6. Band Steering

Product Overview

W1800PRO is an WI-FI 6 Ethernet uplink Mesh Wi-Fi Router, for residential and small office/home office, designed to expand home network coverage and providing 2.4GHz and 5GHz high-speed connection.
The device offers 4 Gigabit Ethernet ports (1 WAN port and 3 LAN ports), 2x2 2.4GHz (11ax)+ 2x2 5GHz (ax).

Button Description

LED Description

Connection and Setup

1. Connect the OnBox according to the diagram.
2. Press the On/Off button on the router. When the Power Status LED is ON and blinking the router is powered on.
3. Once the Power Status LED is steady green the router will have access to Internet. Wired clients (PC/Laptop) can be connected into the available LAN ports (Port 2/3/4), Wireless clients can connect to the router by using the SSID and the password located in the label at the bottom of the router.
4. Set the PC/Laptop to obtain an IP address automatically.
5. Open a Web browser and enter http://192.168.1.1 in the address bar (default value, if DHCP setting are modified use the new gateway IP). The login page will be displayed in the browser.
6. Enter the Username and Password found on the label on the bottom of the router. Then click Login.

Specifications

• Type Wi-Fi 6 Wireless Mesh Router
• Model W1800 Pro
• Main Chip BCM6755
• WLAN FEM SKY85331@2.4G, SKY85743@5G
• Ethernet Ports 4 x GE (Auto-sensing WAN/LAN)
• Operating Temperature 0 ~ 40℃
• Operating Humidity 10%~90%, non-condensing
• Dimension 160.5 x 96 mm
• Installation Desktop
• Weight 380g
• Regulatory FCC

Wi-Fi Performance

• 2.4GHz 802.11ax, 2*2）
• Standard 2.4GHz: 802.11ax, 802.11n
• RF Power EIRP 30dBm
• Antenna Two (2) internal antennas 3dBi Gain
• Connection rate 574Mbps
• 5GHz (802.11ax, 2*2)
• Standard 5GHz: 802.11ax, 802.11ac
• RF Power EIRP 30dBm
• Antenna Two (2) internal antennas 3dBi Gain
• Connection rate 1.2Gbps

Ethernet WAN/LAN

• Interface 4x RJ45 connector
• Standard Compliant with IEEE 802.3, 802.3u, 802.3ab
• Link Support Half-duplex & full-duplex operation
• Support 10/100/1000Mbps auto-negotiation
• Support MDI/MDIX auto detection

Mesh

• Standard Wi-Fi Alliance EasyMesh
• Backhaul Methods Backhaul via Wi-Fi 5G 802.11ax
• Backhaul via Wired RJ-45 Ethernet
• Pairing Method Pushing WPS Button or Auto Paring (pre-configured)

Power

Standard Wall Adapter, 100-240VAC input, 50/60Hz; 12VDC output, 1.5A max.

Buttons and LEDs

Buttons

• Power
• WPS
• Reset

LED

One Tri-color light (Normal, Alarm, WPS)

Features

Security

WPA-PSK, WPA2-PSK, WPA3-SAE, AES, TKIP,WPS

Management

• Web-GUI, Mobile Phone App (optional),
• TR069, IGMPv1/v2/v3, DHCP, NTP Client,
• DDNS, Port Forwarding, DMZ

WAN Connection

• Internet connect type: Static IP, DHCP, PPOE.
• Support Router mode, Bridge mode

Wi-Fi 11AX, MU-MIMO

• HT20/HT40/HT80
• Support Wireless power multi-level selection
• Wi-Fi Timing
• Wi-Fi dual band Roaming
• Band Steering
• Omnidirectional antenna
• EasyMesh

Special Features

• Auto-detecting WAN/LAN
• Support Anti-rub Network
• Support Access Restriction
• Support One-key into blacklist
• Parental Control
• LED Timing
• IP and MAC binding (Using Printer）
• Firewall
• DDNS
• Port mapping
• Traffic Monitoring
• Associate equipment Management
• Support Guest Wi-Fi, Guest Wi-Fi Isolation
• Support IPv6

Diagnose

• Internet diagnosis
• Ping diagnosis
• Traceroute diagnosis