The SBB View Maxi ATV remote control can learn a key function from another ‘source’ remote control. A 'source' remote control is any other remote that is already programmed with the function you want. For example, the remote that came with your Samsung TV could be the 'source' remote control.
Choose your ‘target key’ on the 'source' remote control. It must be one of the following keys: TV/AUX POWER / TV INPUT / VOL+ / VOL- / MUTE. This key will learn a function from the source remote control.
Press 4 and 6 for at least three seconds on the SBB View Maxi ATV remote control. The TV/AUX POWER key will flash twice and remain on.
Press your target key on the SBB View Maxi ATV remote control within 30 seconds:
if valid, the TV/AUX POWER key on the SBB View Maxi ATV remote control will give a confirmation flash and remain on.
if invalid, or you do not press within 30 seconds, the TV/AUX POWER key will give a long flash and return to user mode.
Hold the SBB View Maxi ATV remote control 3 - 6 cm from the source remote control with the IR windows facing each other, then press your target key on the source remote control (e.g. if your target key on the SBB View Maxi ATV remote control is Mute, press Mute on the source remote control).
If the IR signal is received correctly, the TV/AUX POWER key on the SBB View Maxi ATV remote control will turn off and the remote control will return to normal mode. Note: this can overwrite a previously learned code.
If the IR signal is not received correctly, or is received after 30 seconds, the SBB View Maxi ATV remote control will not store the code from the source remote control: it will give a long flash and return to user mode.
If the Back key is pressed on the SBB View Maxi ATV remote control while it is waiting for an IR signal, the TV/AUX POWER key will give a long flash and return to user mode. NOTE: If the target key is pressed, any learned code on it is cleared.
To clear the target key, press 4 and 6 on the SBB View Maxi ATV remote control for at least three seconds. The TV/AUX POWER key will flash twice and remain on. Then press your 'target key' twice. The TV/AUX POWER key will flash to confirm the target key is cleared.