How do I troubleshoot the No Signal message on my TV?

1. Press the Guide button on your Summit Broadband Remote.
   
2. If the Program Guide does not appear switch to the remote that came with your TV.
3. Find the  Input or  Source button and cycle through the options until you see a picture or a message reading, Temporarily Off Air.

If you see the Temporarily Off Air message, complete the following additional steps: 

1. Unplug the Summit Broadband set top box from the wall for 30 seconds. Then plug it in again.
2. When the box reboots, if the picture does not appear, call Summit Broadband.